Connect with us

NEWS

Custom of the Week: BMW R100RS by Bolt Motor Company

avatar

Published

on

MOST CUSTOM BUILDERS are juggling careers, building bikes as a side gig. Adrián Campos falls into that category: he’s the sporting director for Campos Racing, the team founded by his father Adrián Campos Sr, the former Minardi F1 driver.

Adrián Jr. is surrounded by high-tech missiles capable of 208 mph (335 kph), but he’s also nuts about motorcycles. So he started customizing classic bikes, as an antídoto to the ultra-modern race machinery that absorbs his working day.

His first build garnered enough interest to turn his side gig into a fully-fledged second business. Bolt Motor Company is now on its seventeenth build, and employs seven team members.

Bolt shares a workshop in Valencia with Campos Racing. But while the race team preps cars for the Formula 2, Formula 3 and GP3 race series, Adrián is swinging spanners on bikes like this stunning 1982 BMW R100RS.

We’ll admit it’s not the wildest custom boxer we’ve seen. But even though the style is well established, the perfect proportions and level of finish are something else. And the client wasn’t even looking for anything fancy; “He wanted a comfortable cafe racer for two people,” says Adrián, “so that’s what we did.”

The donor arrived in a pretty good condition, but it left in an even better state. There’s fresh paint and powder everywhere, from the motor right through to the forks, frame and tank.

Bolt tweaked the airhead’s stance by lowering the front forks internally just over two inches, then installing a pair of Hagon shocks at the rear. The fuel tank is stock, but the subframe and seat are custom made. The subframe’s a bolt-on affair, and the main frame’s been detabbed and cleaned up.

The taillight’s a particularly nice touch. Bolt built it into the seat rather than the rear loop, along with integrated rear turn signals. The whole setup’s barely visible—until it lights up.

They’ve also added some room for the customer to ‘customize’ his BMW at home. There’s a second tank and seat in a different paint scheme, which can be swapped out via four fasteners for the seat, and one for the tank. The second seat has it’s own plug-and-play taillight too.

Bolt have kept things practical too. The BMW’s airbox is still in play, and it’s also equipped with a BMW oil cooler and crash bars. Plus there’s a discreet inner fender at the rear. The exhaust headers have been shortened and run into a pair of generic cone mufflers, with the side stand relocated to work around them.

The cockpit’s sporting new handlebars, grips, bar-end mirrors and Motogadget bar-end turn signals. There’s a new master brake cylinder too, with some really neat plumbing. Up front is an LED headlight, tucked into a custom-made bucket.

Bolt rewired the bike from top to bottom and tucked away as much as they could. A set of Motone switches have their wires running inside the bars, while a Motogadget speedo has its cable routed through the BMW’s hollow steering stem nut.

This sort of consideration is rife, with every last nook and cranny cleaned up. We’ve spotted stainless steel fasteners throughout the build, nifty choke pulls on the carbs and a OEM-looking Bolt Motor Co. plaque on the side of the motor.

The classic white BMW motorsports livery is on point too. And Bolt have shunned the ubiquitous Firestone Deluxe Champion tires, going for the saw tooth tread of Shinko Classics instead.

We doubt that Bolt #17 could lap a track anywhere near as fast as a Campos race car.

But it’s just the sort of simple, classic ride we’d pick for getting to the track in the first place—via some leisurely Spanish back roads.


This article first appeared on Bike Exif. It’s republished here by permission.

Fire it up in the comments below:

The world's most exciting cafe racers, bobbers, scramblers and trackers. BIKE EXIF IS THE WORLD’S MOST POPULAR showcase for custom motorcycles. Several days a week, we deliver a hand-picked selection of the latest cafe racers, scramblers, trackers and bobbers from top builders.

NEWS

One Year On: Remembering Nicky Hayden

avatar

Published

on

The news that Nicky Hayden passed away was devastating to the whole of the motorsport family.


This article first appeared on Motofire on May 22nd 2017. We’ve republished it here today to commemorate the anniversary of Nicky Hayden’s passing.


Nicky was a champion to his core; from the way he raced to his fierce devotion to his family and the way he made time for everyone. He fought for every single position on every lap of every race and never once gave up. He was firm, leaving no room for doubt on track, but he was always fair and he was one of the hardest workers you’ll ever know, even in a world that includes nothing but riders who push themselves to the limit constantly.

In every way, Nicky was a shining star; images of his tear-stained face when he won his championship in 2006 will forever be ingrained in the collective MotoGP memory, his joy was so tangible that you could have wrapped yourself up in it. And that was Nicky, always inclusive. Whether it was a quick-witted remark in that wonderful Kentucky drawl that we’ll miss so much, his easy manner that made him a friend of everyone who knew him or the way he never turned someone away when they wanted a photo or an autograph. Nicky came from a racing family and he became an integral part of an even larger one.

Losing anyone is always heartbreaking but the loss of a rider when they were out training, doing something as everyday as cycling, makes Nicky’s death at just 35 years old even harder to comprehend.

Nicky holds a place in the MotoGP Hall of Fame, his status as a Legend firmly cemented long before he left for World Superbikes. But he holds something even more valuable; a spot in the collective heart of the entire motorcycle racing family.

His accent will forever raise a smile, at least for me, and his own superstar grin will now bring with it an indescribable sadness. But remember Nicky as he would’ve wanted; that fierce big-hearted champion who pushed himself and everyone around him to be their very best and as that young man who brought so much joy and who left us far too soon.

My thoughts are, of course, with all of the Hayden family, Nicky’s fiancee Jackie, his friends and his teams both past and present.

Now, I’m going to wipe away the tears and watch Valencia 2006 again. I hope you join me to remember Nicky Hayden; a champion, a gentleman and a star that can never truly be extinguished.


This article first appeared on Motofire on May 22nd 2017. We’ve republished it here today to commemorate the anniversary of Nicky Hayden’s passing.

Fire it up in the comments below:
Continue Reading

NEWS

Custom of the week: ‘V09’ BMW R80 by Vagabund Moto

avatar

Published

on

BMW AIRHEAD CUSTOMS are like AC/DC songs: after a while, it’s hard to tell them all apart. And that’s not necessarily a bad thing, because the style is usually pleasing to the eye.

But no one could ever accuse Vagabund Moto of following a conventional formula. Their approach is unique and their bikes buck the mainstream trend. So it’s ironic to learn that the owner of this razor-sharp R80 asked Vagabund to replicate the style of a custom R80 they finished two years ago.

Not surprisingly, builders Paul Brauchart and Philipp Rabl weren’t keen on the idea. “We don’t like to remake bikes we’ve done before,” Paul tells us. “So we suggested sketching out a concept that related to the V05—while adding some special parts.”

Paul and Philipp do their wrenching in a workshop in Graz, Austria, and do as much work as possible themselves. “We’re trying to stay a two-man operation for as long as possible,” says Paul. “We’re good friends and perfectionists. It’s hard to think about trusting someone else, or giving up our awesome workshop relationship.”

The pair started out with a relatively fresh classic tourer: a 1992 R80 RT with only 25,000 km on the dial. And thanks to BMW’s historically good build quality, there wasn’t much engine work needed.

“We took apart the engine and carbs, checked everything, and replaced the not so good parts. And then blasted and painted it.”

Getting the striking Vagabund ‘look’ meant ditching the bodywork though, apart from the fuel tank—but even that’s not quite original. The back end of the tunnel has been closed off, where the gap would normally be blocked by the bulky OEM seat.

Just behind it is a svelte new perch. Vagabund designed the tail hump digitally, then got it 3D printed. It means they could pack a ton of detail into a small space—from the multi-faceted upholstery by Christian Wahl, to the sculpted recess under the tail that hides an LED back light.

Everything sits on top of a custom-made subframe, and the main frame’s been liberated of any unneeded mounts. The rear’s now propped up by a new YSS shock. The wheels are stock, but the rear’s clad in a pair of glass fiber-reinforced plastic covers.

Up front, Vagabund shortened the forks by 60 mm, milled and powder coated the lower legs, and added a pair of fork boots. There’s a custom-made top triple clamp too, playing host to an integrated Motogadget speedo.

The handlebars are from LSL, and have been trimmed down. They wear a Grimeca master brake cylinder, a Domino clutch lever, and custom switches in a 3D-printed housing. There’s a small headlight out front, and a pair of Motogadget bar-end turn signals.

The rest of the bike’s been treated with equal consideration. It’s sporting a set of Continental ContiRoadAttack tires, K&N filters, and a Supertrapp muffler attached to the modified stock headers. And then there’s that striking livery, quite unlike any other we’ve seen, and expertly applied by Graz neighbors i-flow.

But it’s what’s missing that’s just as important: there’s no mess of wires vying for your eye’s attention. The bike’s been totally rewired, with a new diode board and two tiny Ultrabatt lithium-ion batteries, hiding under the tank.

“It’s very important to take care of every cable and braking line, and so on,” says Paul. “Even the handlebars are as clean as possible. It’s one of our biggest jobs to do a totally minimalist wiring setup, and we put a lot of work into parts that nobody ever sees.”

Despite the sano approach, this BMW is completely street legal in Austria. On top of the usual lighting, there’s a license plate bracket at the back that holds a pair of tiny Motogadget turn signals—with just the right amount of visibility to check legal boxes.

“It’s really difficult,” says Paul. “Every light has to be ECE-approved, and has to be mounted at the right angle and position. We have to examine all our builds and every point of customization with a civil engineer before we‘re able to (hopefully) pass the vehicle license authority.”

Titled ‘V09,’ this BMW leaves us thunderstuck. It hits the mark with its stance, proportions and finishes—so we’re counting it as another win for the Austrian duo.


This article first appeared on Bike Exif; It’s republished here with permission.

Fire it up in the comments below:
Continue Reading

On Fire...

Copyright © 2018 Motofire Limited