Connect with us

GEAR

Triumph build a bike!

Published

on

No, not that kind of bike… The pedal-powered kind!

We at Motofire are nerds and love all things two-wheeled. So when Triumph announced the release of a limited production hardtail mountain bike named XCX to go along with it’s Tiger line of ADV bikes, we just had to tell you about it.

As far as specs go, it isn’t too shabby either.

The frame is 6061 Aluminum featuring a tapered head tube along with internal cable routing for a clean, snag free look. The front suspension is handled by a RockShox XC30 unit with 100mm of travel and lockout/preload adjustment. The bike is a 1×11 group with Shimano SLX shifters, cassette, and rear derailleur. Shimano was also used to supply the hydraulic brakes with 180mm front and 160mm rear rotors. As for wheels, the bike rolls on 27.5 (650b) wheels wrapped in 2.10 Kenda Slant Six tires.

You can get the full specs on Triumph UK’s website.

We wouldn’t necessarily consider this bike “High End” but it would be a nice companion to that ADV you have sitting in the garage. Getting dirty on two wheels is fun either way you decide to do it.

Production is said to be limited to a scant 500 and will begin sales in January 2018

Source: Triumph

GEAR

Review: Pando Moto Boss jeans are the most comfortable we’ve ever ridden in

Published

on

Everyone makes abrasive-reinforced denim these days, but Pando Moto are quietly changing the game.

We’ve written about Pando Moto before here on MF. Back in January we were impressed by the quality of their offering – seen only through their catalogue – and their direction that seemed to be ‘making motorcycle clothing for real people’.

But is that promise kept all the way through to riding with them on the bike?

(Pando Moto wanted us to check out the quality of their new jeans, they sent us a new pair to wear – and keep.)

The first thing that grabbed us about the Pando Moto denim on the Boss Black jeans that we were sent, was the stretchy’ness of the denim. For those people who like to wear their slim-fit denim on the bike, but find the cut of most of them unable to keep up with the demands of fast riding, the freedom of movement offered by both the tailoring and the extremely stretchy 13oz denim was a huge benefit.

Armour is provided by knee inserts from Knox and there are hip inserts available too (although you’ll have to buy those yourself – they’re not provided in the box).

With a myriad fabric choice now being available in the ‘abrasion resistant’ arena, the comfort of knowing that your legs are going to protected by good, reliable DuPont Kevlar can’t be understated and – although thankfully we can’t vouch for their strength within a crash – the furry, yellow fabric is positioned in all of the right places and we’re certain that it’ll keep our skin happier than just wearing denim on its own.

There’s no denying that Kevlar is hot however, so whilst the slim-fit of the denim might be welcome, the lack of airflow and warmth from the kevlar next to your skin will mean that you’ll find yourself with a sweaty set of pins by the time you’ve reached your destination.

But whilst the skinny fit might make you a slave to fashion, the little details of the jean show that Pando Moto have thought things through with more focus than most; the one feature that impressed us more than perhaps it should have with the Pando Moto Boss jeans was the clever little reflective strip on the inside seam of the bottom of the legs… When you turnover the jeans – as our little legs AND fashion dictate is a must – that reflective ribbon provides a fantastic extra nod to safety.

We’ve spent just a few days riding in the Pando Moto jeans now, but we honestly haven’t ridden with a more comfortable, more pleasing pair of motorcycle denim than these.

Thoroughly recommended.

Continue Reading

GEAR

Dainese’s 3D custom leather configurator is ridiculously brilliant!

Published

on

You too can design the best – or most hideous – custom leathers available.

If you were wondering why the quantity of articles on Motofire has recently slowed to a snail’s pace, you’d be forgiven for thinking that it’s to do with the fact that we’ve put the site up for sale.

BUT if we’re being honest, the last couple of day’s worth of articles didn’t get published because we were too busy messing about with Dainese’s new custom works configurator for their race leathers.

Seriously, go and take a look, it’s brilliant… And you can pretty much alter every component of your race suit.

Accessible via the website, the brand-new 3D configurator allows each motorcyclist to completely personalise their leather suit, jacket or pants in real time, with a simple, set of interactive toggles and widgets.

You can even upload logos and words.

Once it’s all done, you then just need to make an appointment with your local Dainese custom works centre who will then take your measurements and get you on the way to one-off Dainese suit heaven.

OR you could get the design we produced made in honour of Motofire and you’ll be well on your way to the Milan catwalks!

Source: Dainese

Continue Reading

Facebook

On Fire...

Copyright © 2018 Motofire Limited