Connect with us


Is Suzuki’s ‘Recursion’ turbo finally on its way?



Patent filings suggest that the turbocharged concept from Suzuki might just make it into reality.

Since its reveal at the 2013 Tokyo Motor Show, the concept for a turbocharged Suzuki, parallel twin has had us shaking with excitement.

Is it finally going to get made?

Patents filed and currently being shared around the motorcycle blogs would appear to show a bike, looking very similar to that of the initial Recursion concept from Suzuki, would suggest that this bike is at least making it along the line of engineer drawing boards.

Despite the drawings looking close to the concept, there are some notable differences however.

The engine being displayed within the filled drawings looks to feature double-overhead-cams [DOHC] as opposed to the concept’s single-cam engine, which could mean that it’s actually the larger XE7 unit that the company showcased in 2015 at the same show.

We always take patent filings here with a large pinch of sodium chloride here at MFHQ. There’s been many a patent illustration that has got us all hot under the collar only for it to never see its way past the sketchpad or patent office.

But with Suzuki beginning their much delayed resurgence since being railroaded by the financial crisis of 2008, something tells us that this might just be the year that the Recursion bounces back.


Fire it up in the comments below:

Join us as we aim to lift the coverage of motorcycling online. If it's bikes, then it'll be on Motofire. And don't forget to follow us on Facebook, Twitter and YouTube for all of the latest as well!


Custom of the Week: Yamaha SR500 ‘Scrambler’ by Daniel Peter




SCRAMBLERS ARE A HOT TOPIC. Build one, and you’re sure to be judged solely by how well equipped it is for hardcore off-piste use.

But that’s not all that scramblers are about. Daniel Peter compares his latest build to his childhood BMX—and it’s pretty much how we feel about modern-day scramblers too.

“When I was four years old, my BMX bike became my life,” he explains. “It was so simple, yet so fun. Just wheels, pedals and brakes. I’d ride it to the beach, jump a few curbs along the way, race my friends. Those were the good days.”

“30 years later, I set out to build a motorcycle based on the same principles. There’s nothing on this bike that doesn’t need to be there. It has wheels, a punchy engine and great brakes. I didn’t even put a speedo on it, because I never looked at the one on my last bike.”

Daniel works as a photographer in Chicago, but wrenches during the winter to keep his passion for riding alive. He keeps a workshop in Chicago’s Logan Square neighborhood, outfitted with a tool cabinet, a welder, and a 1940s South Bend lathe.

This 1978-model Yamaha SR500 is the fourth Yamaha 500 he’s built to date. “It’s the most simple, yet the most thorough, of the bunch,” he says.

The motor’s been bumped to 540 cc, with a grocery list of go-fast bits that includes a lighter XT500 crank, a new piston from JE and a Megacycle cam for better torque down low.

R&D valve springs with titanium caps, a Powerdynamo ignition and a high-flow oil pump from Kedo round out the package.

Hoos Racing refreshed the crank and cut new valve seats for Daniel, but he tackled the rest of the rebuild himself. Every single bearing and seal was replaced along the way too. As for the carb, it’s been swapped out for a 39 mm Keihin FCR flatslide number, fed by a fat K&N filter.

The exhaust system is a combination of a custom made stainless steel header, and a Cone Engineering muffler.

The SR rolls on 17” supermoto wheels, borrowed from a KTM (front) and a Honda CRF450 (rear). They’re wrapped in Pirelli MT60 Corsa tread; a 120 up front, and a chunky 160 on the 5” rear rim. (“It juuust fits,” says Daniel.)

The brakes have been upgraded with a mix of Brembo and Beringer parts, with an RCS 14 radial master cylinder up front.

On top is an aluminum Yamaha XT500 fuel tank, wrapped in a paint scheme “inspired by an unforgettable riding trip through Baja.” Just behind it is a new saddle from MotoLanna, with a new kicked-up subframe loop.

It’s just about spring in Chicago, so Daniel must be itching to rack up the miles on his SR500. And we’re betting it’s going to be impossible to get him off it.

A version of this article first appeared on Bike Exif. It’s republished here with permission.

Fire it up in the comments below:
Continue Reading


Icon claim back the streets in their latest, epic video



Street’s Not Dead.

Regular readers will know that we eagerly await anything released from the US streetwear firm Icon Motorsports. So the moment that a video drops from the Portland firm we’re bound to pay attention.

That’s an interest piqued double when they post it alongside what is essentially a call to arms…

“Street’s not dead. If you think it went away, you’d be wrong. Street’s still here undermining pompous authority, rejecting standards, and bucking the status quo..”

And they’re not kidding either. With the Icon clad rider thrashing their Kawasaki ZX-10R through city streets, car parks and even a public fountain at one point, there’s a lot to take in.

Couple that with their usual loud, Icon style and you’ve certainly got a statement of intent.

(Don’t try this at home kids).



Fire it up in the comments below:
Continue Reading

On Fire...

Copyright © 2018 Motofire Limited